API 16A Shaffer Hydril Annular Bop (blowout preventor)
|FOB Price:||US $5,000-50,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $5,000-50,000/ Set|
|Transport Package:||Wooden Case Box|
- Model NO.: api 16a
- Power Source: Hydraulic
- Applicable Medium: Mud, Water, Natural Gas, Crude Oil
- Material: Alloy
- Size: 13-5/8"
- Specification: API 6A
- HS Code: 8431431000
- Certification: ISO 9001:2000, API 16A
- Operation Pressure: Atmospheric Pressure
- Structure: Horizontal
- Pr: 1
- Trademark: JELIN
- Origin: China
It's feasible to control wellhead with annular preventer firstly when blowout occurs in a well where there are drilling tools, but try not to seal it for long, because rubber core is fragile and there is no locking device. Don't close empty well with it in non-special cases.
It's necessary to use a drilling tool with an 18-degree slope when annular preventer is used for snubbing tripping operation. Tripping speed should be slow when passing through joints, and all the rubber sleeves of the drilling tool should be uninstalled.
When annular preventer is in an off state and shut-in pressure is below 5Mpa, it's feasible to move the drilling tool up and down, but don't rotate it.
It's necessary to check whether the well is opened completely after it is opened every time lest rubber core be scraped.
It's necessary to wash the inner cavity out to keep the switch flexible after well cementation and leaking stoppage, etc.
Be sure to pay special attention to sealing backing ring and steel ring groove when installing or uninstalling annular preventer, which cannot be cracked up or scratched.
After entering the target layer, try to shut in the well with drilling tool after tripping each time, to check how well the rubber core seal the well. It should be replaced at once if not up to standard.
Make regular pressure test on the annular preventer according to relevant standards.